Unicycle.com : RSS Products Feed :: Frames & Frame Parts

Kris Holm Aluminium Unicycle Frame

info@municycle.ca (Peter Van Thiel) — Sat, 03 Jul 2010 09:03:21 -0600

New for 2008: stronger machined-butted seat tubes (machined seat tubes have thicker tubing sidewalls at the crown weld) resulting in a stronger crown. Crown is also lowered to improve fit over tire. Note: Bearing Housings included. Standard black KH seat post clamp at no additional charge.

7005 Aluminium alloy, ovalised tubing.
20" weighs 536g.
24" weighs 650g.
29" weighs 675g.
Dark Blue with high durability glossy clearcoat, laser-etched logo.
24" and 29" comes with Magura brake mounts (Magura clamps not included).
Machined 42mm bearing housing.
Fits 27.2mm diameter seatpost.
These new frames have been designed to give a tighter fit round the Duro Wildlife tire, and give you a lower footrest for gliding, but will not accommodate a squarer tire like the Gazzaloddi.

Picture shows 24" model.

Nimbus II 20" Unicycle Frame

info@municycle.ca (Peter Van Thiel) — Wed, 05 May 2010 17:03:50 -0600

The fantastic Nimbus II unicycle frame powdercoated in Blue. Great for trials or freestyle unicycling.

Will fit tires up to 20x2.5". Fits 25.4mm seatpost, comes with bolts and matching colour bearing-cups to fit 42mm bearings. Does not come with seatpost clamp. Weighs 770g.

Kris Holm 36-inch Frame

info@municycle.ca (Peter Van Thiel) — Fri, 02 Apr 2010 10:11:08 -0600

Note: Bearing Housings included. Standard black KH seat post clamp at no additional charge.

Kris Holm 20-inch Double Crown Frame

info@municycle.ca (Peter Van Thiel) — Fri, 02 Apr 2010 10:10:47 -0600

***42mm Machined Bearing Housings***
This frame concept was suggested by Matt Bunting and is an experiment in a new kind of frame for flatland and technical street riding. It has two crowns, as the name suggests, allowing unprecedented stability for standup tricks. Stand on the frame in any orientation and re-create the world of street and flatland riding! Note: Bearing Housings included. Standard black KH seat post clamp at no additional charge.

Features:

Stiff, lightweight 7005 T6 Aluminum

Machine-butted 27.2 mm seatpost tubes with a thicker, stronger sidewall at the welds

Machined 42mm bearing housings

Curved, knurled crown combines advantages of both flat-top and curved styles

KH Bearing Clamps

info@municycle.ca (Peter Van Thiel) — Sun, 14 Feb 2010 11:00:39 -0700

Replacement bearing clamps to fit the Blue Aluminium Kris Holm frames.

These will fit the later Kris Holm Aluminium frames which have the knurled crowns.

These clamps are designed to fit hubs with 42mm bearings if you want to use them with 40mm bearings you will need to use bearing shims.

Sold in pairs and comes with 4 bolts & washers.

Kris Holm 20-inch Longneck Frame

info@municycle.ca (Peter Van Thiel) — Sun, 14 Feb 2010 10:56:47 -0700

***42mm Machined Bearing Housings*** The new KH 20-inch 300mm longneck frame is now available. Get yours today! Note: Bearing Housings included. Standard black KH seat post clamp at no additional charge.

Stiff, lightweight 7005 T6 Aluminum
Machine-butted 27.2 mm seatpost tubes with a thicker, stronger sidewall at the welds
Machined 42mm bearing housings
Curved, knurled crown combines advantages of both flat-top and curved styles

Nimbus 36" Unicycle frame

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:11:54 -0600

***42mm Machined Bearing Housings***

The new 2008 Nimbus 36-inch frame is finally here! This frame has 42mm machined bearing housings and is compatible with the Nimbus Super Wide ISIS hub! Note: Seatpost clamp and bearing housings included.

Features:

The frame design with its twin fork legs, reinforcing plates, triangulated crown supports and CrMo construction give this unicycle considerably greater rigidity than a standard one. This rigidity helps in many ways; it increases the fine control of the wheel which is needed for speed, reducing stress on the bearings so increasing their life and gives better cornering by reducing uncontrollable twist. The frame comes with mounts to allow you to fit Magura HS33 brakes if you are intending to do a lot of hill work on the unicycle.

Frame: CrMo tubular steel, powder-coated Cranberry
Brake mounts: Magura bosses welded onto frame enables the rider to add optional Magura brake and mounting bracket
Bearing clearance: 125mm (center-to-center)
Bearings: 6203 (42x22x12mm) sealed
Bearing housings: machined
Seatpost size: 25.4mm
Hub: Compatible with Nimbus ISIS Super Wide Hub (frame not compatible with narrower hubs).

Nimbus 26-inch Muni Frame with Brake Mounts

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:11:43 -0600

The Nimbus Muni frame is rigid, strong and wide with a flat top for your foot. This style of flat top is better than a normal flat top as it tilts the foot in towards the seat stem offering greater grip.

Note: This new frame has 42mm machined bearing housings. Seat tube is 25.4mm. Seatpost clamp and bearing housings included.

Features:
Red, Black powdercoated or Chrome finish
Magura Brake mounts
42mm forged bearing housings
Includes matching bearing caps and bolts
The 26-inch will fit an ISIS wheel-set using 42mm bearings. It will fit a 26 x 3.0 tire with a small clearance.

Nimbus 24-inch Muni Frame with Brake Mounts

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:11:30 -0600

The Nimbus Muni frame is rigid, strong and wide with a flat top for your foot. This style of flat top is better than a normal flat top as it tilts the foot in towards the seat stem offering greater grip.

Note: This new frame has 42mm machined bearing housings. Seat tube is 25.4mm. Seatpost clamp and bearing housings included.

Features:
Orange, or Black powdercoated or Chrome finish
Magura Brake mounts
42mm forged bearing housings
Includes matching bearing caps and bolts
The 24-inch will fit an ISIS wheel-set using 42mm bearings. It will fit a 24 x 3.0 tire with a small clearance.

Nimbus II 24-inch Frame

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:11:17 -0600

***42mm Machined Bearing Housings***

The Nimbus II frame is rigid, strong and wide with a flat top for your foot. This style of flat top is better than a normal flat top as it tilts the foot in towards the seat stem offering greater grip. This new frame now offers a 42mm forged bearing housing. Seat tube is 25.4mm. Note: Seatpost clamp and bearing housings included.

This frame is built for 42mm bearings, and ISIS hubs!

Nimbus II 29-inch Frame

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:10:55 -0600

Nimbus X 20-inch Long Neck Frame

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:08:22 -0600

The CrMo frame fork legs are tapered up to the optimum crown width for freestyle unicycling, the crown also has zero external overhang.

The seatpost is 22mm diameter (rather than 25.4mm) to allow the foot to get closer to the center of balance when doing stand-up tricks.

The frame has been constructed with an internal 120mm reinforcement tube interlocked with the crown vastly improving strength and durability over previous long-neck frames.

Minimal tire to frame clearance to help with stand up tricks.

Machined 42mm bearing housings for smooth movement .

The frame is available in 2 sizes: 300mm and 400mm (measured from crown to top of seat tube). The longer seat tube enables the seatpost clamp to be closer to the saddle, this protects your legs and your seat post.

Leg lengths:
300mm frame: 75 - 105cm (30� � 41�)
400mm frame: 85 - 115cm (34� � 45�)
These measurements are based on a 400mm long seatpost and 114mm cranks.

Main-Cap Brackets

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:07:31 -0600

Bracket pairs only, no bolts, nuts or washers. Fits 40-mm OD bearings.

Free shipping on this product

Nimbus 42mm Frame Brackets

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:07:18 -0600

For the new Nimbus 42mm machined bearing housing frames! Sold in pairs only.

UDC Bearing Adapters

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:07:06 -0600

These enable you to fit hubs with 40mm bearings into frames designed to fit 42mm bearings.

These CNC-machined aluminum shims fit the standard 6203-2RS bearings found on most cotterless hubs.

Sold in pairs, bearings not included.

Nimbus II 16-inch Frame

info@municycle.ca (Peter Van Thiel) — Sun, 21 Jun 2009 10:06:36 -0600

Flame Stickers

info@municycle.ca (Peter Van Thiel) — Wed, 17 Jun 2009 10:43:31 -0600

These stickers dress up any frame! In several bright colors! Sold in pairs.