http://www.municycle.ca/ en Copyright (c) 2010 Peter Van Thiel info@municycle.ca (Peter Van Thiel) info@municycle.ca (Peter Van Thiel) Sun, 29 Aug 2010 11:38:32 -0600 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 http://www.municycle.ca/kris-holm-titanium-hub-with-silver-flanges-p-502.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=502 Built for aggressive trials, street and mountain unicycling while remaining lightweight at 1 pound with the bolts and spacers! Note: This hub utilizes 42mm bearings, and is compatible with 42mm frame/bearing housings only.

Features:

•Flange spoke hole size are optimized for 14g spokes (2.5 mm, 0.5 mm bevel)
•The KH MomenTi hub combines top materials with careful design to produce an extremely strong, lightweight, and beautiful hub.
•ISIS spline
•Titanium axle and high strength, machined 7075-T6 aluminum flanges
•Lightweight, hollow carbon fiber hub body
•Flanges are machined separately and pressed onto axle splines, improving strength and allowing the use of a lighter hub body
•Flanges are carefully shaped and sized for optimal wheel strength
•Bearings: 22 x 42 x 12
•Weight: 444g

These will fit all ISIS cranks except Koxx ISIS cranks.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/kris-holm-titanium-hub-with-silver-flanges-p-502.html Sun, 09 May 2010 19:17:49 -0600 405.00 CAD 502 1 Kris Holm Unicycles http://www.municycle.ca/images/large/DSC_0354_LRG.JPG http://www.municycle.ca/nimbus-isis-hub-48hole-p-318.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=318 Built to be more robust and durable than the traditional cotterless, or non-ISIS splined hubs. Compatible with 2007-2008 48-hole rims featured on the Nimbus II 20 & 24-inch ISIS cycles, Nimbus X 20 & 24-inch ISIS cycles, and all 42mm bearings and 42mm machined frame housings.

Note: This hub utilizes 42mm bearings, and is compatible with 42mm frame/bearing housings only.

Features:
ISIS spline is strong and creak free
Tempered 4130 CrMo spindle
Wide flange spacing for increased wheel strength
Flange material hardness and shape are designed to maximize spoke strength
Sealed, 42mm bearings with standard 100mm spacing-included
48 spoke holes
Comes with pair of ISIS bolts
Weighs: 1.4 lbs (including bolts and spacers)
These will fit all ISIS cranks except Koxx ISIS cranks.

Note: this hub will not fit in frames with machined bearing housings designed for 40mm bearings. It requires either pressed bearing housings or frames machined to take these larger bearings.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/nimbus-isis-hub-48hole-p-318.html Fri, 02 Apr 2010 09:47:22 -0600 70.00 CAD 318 1.5 Nimbus Unicycles 1 http://www.municycle.ca/images/large/nimbus_isishub-48holes_LRG.jpg http://www.municycle.ca/nimbus-isis-hub-36-hole-p-174.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=174 This is the next generation of hub. It is built to be more robust and durable than the traditional cotterless hub.

Features:

ISIS spline is strong and creak free
Tempered 4130 CrMo spindle
Wide flange spacing for increased wheel strength.
Flange material hardness and shape are designed to maximise spoke strength.
Sealed, 42mm bearings with standard 100mm spacing
36 spoke holes
Comes with pair of ISIS bolts.
Weighs: 600g (635g including bolts and spacers)

Compatible with all ISIS unicycle cranks except Koxx ISIS cranks.

See our large selection of ISIS cranks.
Note: this hub will not fit in frames with machined bearing housing designed for 40mm bearings. It requires either pressed bearing housings or frames machined to take these larger bearings.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/nimbus-isis-hub-36-hole-p-174.html Fri, 02 Apr 2010 09:46:46 -0600 70.00 CAD 174 1.399 Nimbus Unicycles 79 5 http://www.municycle.ca/images/large/hubNimbusISIS_LRG.jpg http://www.municycle.ca/kris-holm-isis-moment-hub-p-382.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=382 New for 2009! With CNC machined aluminum flanges. This generation of Moment hubs is Kris Holm’s newest upgrade. Built for aggressive trials, street and mountain unicycling.

Note: This hub utilizes 42mm bearings, and is compatible with 42mm frame/bearing housings only. Hub Features:


ISIS splines
CNC machined 7071 aluminum flanges
Wide flange spacing for increased wheel strength.
Flange material hardness and shape are designed to maximize spoke strength.
Sealed, 42 mm bearings with standard 100 mm spacing
Flange width-Center flange to center flange- 75mm, Flange diameter- 65.5 mm

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/kris-holm-isis-moment-hub-p-382.html Wed, 03 Feb 2010 15:41:20 -0700 112.00 CAD 382 1 Kris Holm Unicycles 8 http://www.municycle.ca/images/large/KHhubISIS2009_LRG.jpg http://www.municycle.ca/udc-wide-crmo-hub-36-holes-p-175.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=175 Super hard hub specially produced for Unicycle.com with wider flange spacings for a lot stronger wheel. This is probably the strongest cotterless hub you can get for a unicycle, as fitted to Trainer unicycles and some Nimbus unicycles.

The wider the flanges are spaced the stronger the wheel, these flanges are placed as wide as they can be without changing the bearing positions. The spoke holes fit 14 gauge spokes but can be drilled out to fit 12 gauge spokes. Will fit most unicycles except Dodgers and Pashleys. If you are not sure contact us before ordering.

Available in Black with 36 holes or Black with 48 holes.

No of spoke holes - 36
Material - CrMo
Bearings - 6203-2RS (40mm)
Type - Cotterless
Bearing Separation - 100mm (midpoint to midpoint)
Weight - 580-590g with bearings and bolts.
Comes with spacers, bearings and a pair of high tensile bolts.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/udc-wide-crmo-hub-36-holes-p-175.html Wed, 05 Aug 2009 14:34:20 -0600 30.00 CAD 175 1.3 Municycle.ca 5 http://www.municycle.ca/images/large/hubwidecrmo_LRG.jpg http://www.municycle.ca/unicycle-bearings-single-p-178.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=178 *New super low price on 6203-2RS Bearings!* Quality replacement bearings for unicycles. Double-sided sealed bearings.

6203-2RS fits Coker, DM, Dodger, Nimbus, Trainer, UDC unicycles, Carbon fibre unicycles and Sem unicycles, new coker wide hubs and UDC wide CroMo hub.

All our bearings are sealed against dust and moisture, hence the rs (rubber sealed) in their name.
6004-2RS fits splined Onza and Kris Holm unicycles (not the ISIS ones).

ISIS bearings fit Kris Holm, Onza, Nimbus & Qu-Ax ISIS hubs (does not fit Koxx hubs).

Dimensions:
InsideDiameter Outside Diameter Thickness 6203-2RS 17mm 40mm 12mm 6004-2RS 20mm 42mm 12mm ISIS 22mm 42mm 12mm

Check our FAQ on fitting and removing unicycle bearings.

Price is per bearing, if you need a set order quantity 2

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/unicycle-bearings-single-p-178.html Sat, 20 Jun 2009 09:40:02 -0600 6.00 CAD 178 0.1 Municycle.ca 46 http://www.municycle.ca/images/large/bearing_LRG.jpg http://www.municycle.ca/22-x-40-mm-bearing-shims-pair-p-419.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=419 This set of bearing shims allows compatibility between ISIS hubs and frames with 40mm bearing housings. Sold in pairs.Note:to be fully compatible, frames must also have the same bearing spacing as the available ISIS hubs (e.g.100mm for KH Moment or Nimbus hubs).

This set of bearing shims allows compatibility between ISIS hubs and frames with 40mm bearing housings.
Sold in pairs.
Note:to be fully compatible, frames must also have the same bearing spacing as the available ISIS hubs (e.g. 100mm for KH Moment or Nimbus hubs).

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/22-x-40-mm-bearing-shims-pair-p-419.html Sat, 20 Jun 2009 09:27:21 -0600 32.00 CAD 419 0.2 Kris Holm Unicycles 9 http://www.municycle.ca/images/large/kh_bearing_22b40_LRG.jpg http://www.municycle.ca/udc-bearing-shims-p-177.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=177 These enable you to fit hubs with 40mm bearings into frames designed to fit 42mm bearings.

These CNC-machined Aluminium shims fit the standard 6203-2RS bearings found on most cotterless hubs.

Sold in pairs, bearings not included.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/udc-bearing-shims-p-177.html Thu, 18 Jun 2009 19:25:27 -0600 8.00 CAD 177 0.1 Municycle.ca 5 http://www.municycle.ca/images/large/bearingshim_LRG.jpg http://www.municycle.ca/udc-wide-crmo-hub-48-holes-p-321.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=321 A new super-hard 48-hole hub specially produced for Unicycle.com, with wider flange spacings for a much-stronger wheel. Center-flange to center-flange distance is 71mm. Flange OD is 66mm. Flange width is 3mm.

Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.with spacers, bearings and a pair of high tensile bolts.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/udc-wide-crmo-hub-48-holes-p-321.html Wed, 17 Jun 2009 10:39:43 -0600 36.00 CAD 321 1.3 Municycle.ca http://www.municycle.ca/images/large/udc_wide_crmohub-48holes_LRG.jpg http://www.municycle.ca/udc-superwide-chromoly-hub36-holes-p-320.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=320 A new super-hard hub specially produced for Unicycle.com, with super-wide flange spacings for a super-strong wheel. Center Flange to center flange distance is 100mm. Flange OD is 56mm. Flange width is 3mm. Overall width, end-to-end is 180mm. Spoke holes are for 14 gauge spokes not 12 gauge spoke (Coker spokes). Can be drilled to fit 12 gauge spokes. The measurement from outside bearing to outside bearing is 140mm.

Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.

The wider the space between flanges, the stronger the wheel. These flanges are spaced farther apart than any other hub currently in production. Compatible with Coker unicycle frames only.

Includes a pair of high tensile-strength bolts and 17 x 40-mm double-seal bearings. The measurement from outside bearing to outside bearing is 140mm.

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/udc-superwide-chromoly-hub36-holes-p-320.html Wed, 17 Jun 2009 10:38:38 -0600 38.00 CAD 320 1.5 Nimbus Unicycles http://www.municycle.ca/images/large/udc_superwide_crmohub-36hole_LRG.jpg http://www.municycle.ca/nimbus-isis-superwide-hub-36hole-p-319.html http://www.municycle.ca/index.php?main_page=product_reviews&products_id=319 Built to be more robust and durable than the traditional cotterless, or non-ISIS splined hubs. Compatible with 2007-2008 36-hole rims featured on the Nimbus 36-inch Cycles.

Note: Hub only compatible with Nimbus 36-inch 2008 Cranberry ISIS (42mm) frame.


ISIS spline is strong and creak free
Tempered 4130 CrMo spindle
Wide flange spacing for increased wheel strength
Flange material hardness and shape are designed to maximize spoke strength
Sealed, 42mm bearings with standard 100mm spacing-included
36 spoke holes
Comes with pair of ISIS bolts
Weighs: 1.8 lbs (including bolts and spacers)

]]> info@municycle.ca (Peter Van Thiel) http://www.municycle.ca/nimbus-isis-superwide-hub-36hole-p-319.html Wed, 17 Jun 2009 10:38:12 -0600 112.00 CAD 319 1.8 Nimbus Unicycles 1 http://www.municycle.ca/images/large/nimbus_isissuperwidehub-36holes_LRG.jpg